YAMAHA DSP-R992
¥ 110,000 (released in 1997)
Commentary
This DSP AV amplifier is compatible with Dolby digital and capable of 5.1 channel playback.
Equipped with the YSS 245 f as a key device for sound field processing.
The YSS140-F has built-in functions required for Yamaha's original cinema DSP processing, and realizes a Dolby Digital Prologic Decoder and a hard DSP sound field processing in one chip for the YSS140-F. 245.
As a result, 5.1 channels of Dolby digital signals can be fully decoded with 24-bit high precision, and combined with a 3-field cinema DSP LSI, it realizes realistic theater sound.
The Yamaha Sound Field Program has 13 programs.
Sound field data exclusively for Dolby Digital is used for Enhanced and Movie Theater, sound field programs for Dolby Digital, drawing out the potential of Dolby Digital.
The amplifier section contains a 5-channel discrete amplifier of the same design.
The DSP-R992 supports 4 Ω speaker drives for all channels.
Built-in FM/AM tuner.
The tuner is equipped with preset functions for 40 stations, auto-preset functions for FM stations, and edit functions for preset stations.
It is equipped with eight input terminals. The DVD/LD has digital input coaxial with the optical system and the TV/DBS has digital input coaxial with the optical system.
In addition, S terminals of input Line 5 and output Route 3 are mounted.
The Rec out selector on the front panel allows smooth recording without changing the connection on the rear panel.
It also has a built-in BGV function that combines AV source video with audio from other audio sources.
Room 2 out terminal is mounted.
The audio / video signal of the device selected by the Rec out selector is output and a second TV, etc. can be connected.
There are 2 color variations of titanium color and gold.
On-screen capability.
* The output of on-screen signal is output to both composite / S video if there is no input to composite / S video. Also, if there is input to composite and there is input to S video, it is output only to composite output.
If both composite and S-image have input, S-image output will be used.
By using the separately sold APD-1, it is possible to play 5.1 channels with a Dolby digital compatible LD player.
A learning remote a learning remote controller that allows you to select the sound field and adjust various parameters.
This remote control is pre-set with Yamaha's centralized operation control function and is equipped with a macro function that allows multiple operations to be performed by pressing a single key.
Model Rating
Type | DSP AV Amplifier |
<Audio section> | |
Rated output | Main : 80W + 80W (8 ohm, 20 hz to 20 khz, THD0.04%) Center : 80W (8 Ω, 20 Hz ~ 20 kHz, THD0.07%) Rear : 80W + 80W (8 ohm, 20 hz to 20 khz, THD0.07%) |
Dynamic power (by IHF dynamic headroom measurement) | 130W + 130W (8 Ω) 160W + 160W (6 Ω) 200W + 200W (4 Ω) 240W + 240W (2 Ω) |
Power bandwidth | 10 Hz ~ 50 kHz (THD 0.09%, 40W, 8 Ω) |
Damping factor | 160 (20 Hz ~ 20 kHz, 8 Ω) |
Input Sensitivity / Impedance (100W, 8 Ω conversion) | Phono MM : 2.5mV/47k Ω CD, etc. : 150mV/47k Ω |
Maximum Allowable Input (1 kHz) | Phono MM:110mV(THD 0.04%) CD and others : 2.3 v (Effect on, THD 0.5%) |
Output Level / Impedance | Rec out : 150mV/2.7k Ω Room2 out : 150mV/1.5k Ω Pre out Main : 2.6V/1.1k Ω Subwoofer : 4.0V/1.2k Ω (Main SP : small) |
Headphone Output / Impedance | CD, etc. : 0.5V/390 Ω (1 kHz, 150 mV, 8 Ω) |
Frequency characteristic | CD and others, Main : 20 Hz to 20 kHz ± 0.5 dB |
RIAA deviation | Phono MM : + / - 0.5 dB |
Total harmonic distortion rate (20 Hz to 20 kHz) | Phono MM : 0.02% (Rec out, 1 V) CD, etc. : 0.025% (Effect off, SP out, 40W, 8 Ω) |
S/N ratio (input short) | Phono MM:80dB(2.5mV) CD and others : 96 dB (150 mV, Effect off) |
Residual noise | 170 μ V (Main L/R) |
Channel separation (Effect off, Vol-30dB) | Phono MM : 60dB/55dB (input short, 1kHz/10kHz) CD, etc. : 60dB/45dB (input 5.1k Ω short, 1kHz/10kHz) |
Tone control | Bass : ± 10 dB (50 Hz) Turnover frequency : 350 Hz Treble : ± 10 dB (20 kHz) Turnover frequency : 3.5 kHz |
Bass Extension | +6dB(50Hz) |
Filter characteristic | Main L/R (Main SP : Small) : HPF fc = 90 Hz, 12dB/oct Rear L/R (Rear SP : Small) : HPF fc = 90 Hz, 12dB/oct Subwoofer : LPF fc = 90 Hz, 24dB/oct. |
Gang error | 3 dB (Main L/R, 0 to -60dB) |
Muting | - ∞ |
<Video Part> | |
Video signal system | NTSC |
Video level | 1.0Vp-p/75 Ω |
S-video signal | Y : 1.0Vp-p/75 Ω C : 0.286Vp-p/75 Ω |
Maximum allowable input | 1.5Vp-p |
S/N | 50dB |
Monitor out frequency band | 5 hz to 10 mhz -3dB |
<DSP Unit> | |
Dolby Digital (AC-3) Decoder | Yamaha YSS243-F |
DSP | Yamaha YSS245-F |
Center mode | Normal / Wide / Phantom |
Test tone | L-C-R-RS(RR)-RS(RL) |
Program | Hifi DSPs : 6 types Cinema DSPs : 5 types Dolby Prologic : 1 type Dolby Digital : 1 type |
<Input / Output Unit> | |
Input terminal | Digital audio signal Optical : 1 system (DVD/LD) Coaxial : 2 systems (DVD/LD, TV/DBS) Analog audio signal : 8 channels (Phono, CD, Tape (MD), DVD/LD, TV/DBS, VCR1, VCR2, Video aux) Composite video signal : 8 channels (DVD/LD, TV/DBS, VCR1, VCR2, Video aux) S video signal : Line 5 (DVD/LD, TV/DBS,, VCR1, VCR2, Video aux) |
Output terminal | Rec out Audio signal : Route 3 (Tape/MD, VCR1, VCR2) Composite video signal : 2 systems (VCR1, VCR2) S video signal : 2 systems (VCR1, VCR2) Room2 out Voice signal : 1 system Composite video signal : 1 system Pre out : 8 routes (Main L/R, 2 Center, 2 Rear L/R, 2 Subwoofer (mono)) Speaker : 8 systems (Main L/R (A, B), Center (Single/Dual), Rear L/R) Monitor out Composite video signal : 1 system S video signal : 1 system |
FM Tuner Section | |
Receiving sensitivity | 76.0 mhz to 90.0 mhz |
50 dB S/N sensitivity (1 kHz, 100% modulation) | Mono : 1.55 μ V (15.1 dBf) Stereo : 21 μ V (37.7 dBf) |
Image interference ratio | 78dB |
IF interference ratio | 76dB |
Spurious interference ratio | 120dB |
AM suppression ratio | 44dB |
Capture ratio | 1.5dB |
Effective selectivity | 85 dB (± 400 kHz) |
Signal-to-noise ratio | mono:80dB stereo:75dB |
Distortion Factor (1 kHz) | mono:0.1% stereo:0.2% |
Stereo separation | 50dB(1kHz) |
Frequency characteristic | 20 Hz to 15 kHz ± 1.5 dB |
<AM Tuner Section> | |
Receiving frequency | 531 to 1611 kHz |
Practical sensitivity | 100 μ V/m |
Selectivity | 32dB |
Signal-to-noise ratio | 50dB |
Image interference ratio | 40dB |
Spurious interference ratio | 50dB |
Total harmonic distortion factor | 0.3%(1kHz) |
<Tuner audio section> | |
Output Level / Impedance | FM : 500mV/2.2k Ω (100% modulation, 1 kHz) AM : 150mV/2.2k Ω (30% modulation, 1 kHz) |
<General> | |
AC outlet | Switched : 2 systems, Total 120 Wmax |
Power supply voltage | 100 VAC, 50Hz/60Hz |
Power consumption | 290W (Impedance selector setting : bottom) 260W (Impedance selector setting : upper) |
External dimensions | Width 435x Height 171x Depth 391 mm |
Weight | 13.8kg |
Attachment | Learning Remote Controller (Light Storage Type) FM simple antenna AM loop antenna |
Surround Mode | Cinema DSP program ProLogic (PCM / analog input) / Digital (digital input) Pro Logic Enhanced (PCM / analog input) / Digital Enhanced (digital input) 70mm Movie Theater/Digital Movie Theater TV Sports HiFi DSP program Stadium Disco Rock Concert Jazz Club Church Concert Hall |