Technics SB-600
¥ 39,800 (1 unit, around 1971)
Commentary
A speaker system designed to improve directional and transient characteristics under the theme of multi-seller horn.
The low-range is equipped with a high-compliance type 30 cm cone woofer.
The edge of this unit is non-directional and has the advantage of light weight. It is made of urethane with discontinuous bubbles. Moreover, it is formed into a convex shape opposite to the conventional concave edge to improve input resistance and linearity.
The middle area is equipped with a horn type squaker.
The horn section is an 8-cell type multi-seller horn. By dividing the inside of the horn into upper, lower, left and right cells, the directivity, which is a problem with horn types, is improved.
In addition, a hard duralumin diaphragm is used for the diaphragm to achieve low distortion and improved transient characteristics.
Two horn type tweeters using a 6-cell multi-seller horn are installed in the high range.
Equipped with independent attenuators for each of the mid-range and high-range regions, it can be switched to 3 stages.
The enclosure is hermetically sealed and has a Oceania cheeks oil finish on the exterior.
Equipped with a multi-amplifier terminal, 2-way / 3-way multi-amplifier drive is possible by switching the mode switch.
Model Rating
Method | 3-way, 4-speaker, airtight type, bookshelf type |
Units Used | For low band : 30 cm cone type For Middle Range : Horn Type For High Frequency : Horn Type x2 |
Playback frequency band | 30 Hz to 20 kHz |
Impedance | 8 Ω |
Output sound pressure level | 94dB/W/m |
Allowable input | 45W |
Crossover frequency | 750 Hz, 6 kHz |
Level control | For Middle Range : + 3 ~ 0 ~ -3dB (Equipped with OFF Switch) For High Frequency : + 3 ~ 0 ~ -3dB (with OFF switch) |
External dimensions | Width 380x Height 660x Depth 300 mm |
Weight | 19kg |