SANSUI APS-430
¥ 159,800 (1 unit, around 1970?)
Commentary
This is a stereo set with high sound quality by introducing a combination lattice design and Sansui's amplifier technology.
Receiver section
The output section uses a three pole output tube and a high-capacity, wide-band output transformer.
The head amplifier uses a silicon transistor and vacuum tube DC ignition system to reduce hum and expand the dynamic range.
A low-impedance cathode-follower recording terminal is used to prevent wiring from lowering the high-frequency range.
In addition, tone control of the cathode follower drive provides sound quality from low to high range.
Player part
The player uses a 4-pole synchronous motor.
The cartridge uses MC type.
Speaker part
It is a 3-way configuration equipped with a 25 cm cone woofer, 12 cm cone squaker and horn type tweeter using a powerful magnetic circuit. The network section is equipped with a full-scale 12dB/oct network.
Other
The cabinet has a walnut finish and is designed to allow for separate left and right speakers and center box.
The center box is designed with a vertical amplifier section, and has a structure with a shutter door.
Model Rating
Type | Stereo |
Amplifier Unit | |
Music power | 30W |
Effective power | 14W/14W |
Distortion factor | 0.8% |
Power Band Width | 20 Hz to 20 kHz |
Damping factor | 22 (8 Ω) |
Input sensitivity | Phono:2.6mV Aux:260mV |
Tuner Section | |
Sensitivity | FM : 2.5 μ V AM : 20 μ V |
<Player Part> | |
Wow flutter | Not more than 0.2% |
Motor | 4-pole synchronous motor |
Turntable | 30 cm Aluminum Die Cast |
Tone arm | Non-resonant pipe arm / universal shell equipment |
Cartridge | MC Type |
Needle tip | Diamond needle |
Frequency characteristic | 20 Hz to 20 kHz |
Needle pressure | 2.5g |
Speaker Unit | |
Method | 3-way, 3-speaker |
Units Used | For low band : 25 cm cone type For Medium Range : 12 cm cone type For High Frequency : Horn Type |
Max Input | 15W |
<Others> | |
External dimensions | Width 1,544x Height 700x Depth 410 mm |
Weight | 73.2kg |