Audio Database
APS-330
Commentary

This is a stereo set that uses a lattice design.


Receiver section
A silicon power transistor is used for the amplifier.

The FM tuner section is equipped with a double limiter circuit to reduce noise.
The FM multi-circuit employs a switching system.

Ferrite bar antenna is installed in the AM tuner section.


Player part
A belt drive system using a synchronous motor is adopted as the drive system.

Equipped with an auto return function that automatically returns the arm when the record performance is finished.
In addition, the auto-cut function allows you to turn the power off by moving the arm back even in the middle of a song.


Speaker part
It uses a 3-way configuration that combines a 25 cm cone woofer, a rear sealed 12 cm cone squaker, and a horn type tweeter. The network section is equipped with a full-scale LC network.


Other
The cabinet has a walnut finish and is designed to allow for separate left and right speakers and center box.

The center box is designed with a vertical amplifier section, and has a structure with a shutter door.

Model Rating
Type Stereo
Amplifier Unit
Music power 30W
Effective power 10W/10W
Distortion factor 1.5%
Power Band Width 30 Hz to 15 kHz
Damping factor 20 (8 Ω)
Input sensitivity Phono:2mV
Aux:120mV
Tuner Section
Sensitivity FM : 4 μ V
AM : 20 μ V
<Player Part>
Drive system Belt drive system
Motor 4-pole synchronous motor
Turntable 30 cm Aluminum Die Cast
Tone arm Static balanced non-resonant pipe arm
Cartridge MM Type
Needle tip Diamond needle
Frequency characteristic 20 Hz to 20 kHz
Needle pressure 3g
Attachment mechanism Auto return
Speaker Unit
Method 3-way, 3-speaker
Units Used For low band : 25 cm cone type
For Medium Range : 12 cm cone type
For High Frequency : Horn Type
Max Input 25W
Frequency characteristic 50 Hz to 20 kHz
<Others>
External dimensions Width 1,780x Height 590x Depth 430 mm
Weight 69kg