SANSUI FR-2060

Commentary

A record player with an elaborate hi-fi design.

With a 16-pole synchronous motor dedicated for automatic operation and a unique return position detection mechanism, smooth operation is possible without applying lateral pressure to the needle tip.

Uses 30 cm aluminum alloy die-cast turntable.
The flywheel effect is large and stable rotation is possible.

The tone arm uses a static balance type tone arm for accurate and easy needle pressure adjustment.
The balance weight is a needle pressure direct reading type.

A MM type cartridge is used.

Both shell and arm terminals are gold-plated.

It uses an insulator made of special synthetic rubber, a low-capacity output cord, and a sturdy player case.

A fleece top type dust cover, a head shell stand and a remote controller can be connected.

A separately sold remote controller can be connected.

Model Rating

Type	Stereo record player
Method	2-speed belt drive automatic system
Automatic operating mechanism	Automatic system with 4 rpm 16-pole synchronous motor (lead-in, return, cut, repeat, arm lift)
<Turntable portion>
Turntable	30 cm diameter, made of die-cast aluminum alloy
Motor	4-pole synchronous type
Drive system	Belt drive system
Rated speed	33 1/3, 45 rpm
Wow and flutter	Not more than 0.07%
S/N	45 dB or more
Tone Arm Section
Tone arm	Static Balance Type, Needle Pressure Direct Reading Type Pipe Arm With Lateral Balancer 4-terminal plug-in head type
Total Length	220 mm (Effective Length)
Overhang	15mm
Tracking error	± 1.5 °
Usable cartridge maximum weight	13g (Use attached shell)
Cartridge Section
Cartridge	Moving Magnet Type (SV-10A)
Frequency characteristic	10 Hz to 22 kHz
Separation	25dB(1kHz)
Output balance	± 0.5 dB at 1 kHz
Output voltage	3.5 mv (1 kHz, 50mm/s)
Standard load impedance	50k Ω
Compliance	18x10-6cm/dyne
Needle tip	0.5 mil Diamond Needle (SN-10A)
Proper needle pressure	2g ± 0.5g
Cartridge Weight	6.5g
<General>
Attachment	Remote controller socket Antihowling insulator 45 Adapter for Rotating Disk
Dust cover	Smoked Acrylic, Fleece Top Type (Removable)
Power supply voltage	100 VAC, 50Hz/60Hz
Maximum Power Consumption	14W
External dimensions	Width 442x Height 192x Depth 352 mm
Weight	7.5kg
Sold Separately	Remote Controller SRC-6 (¥ 2,500)