Pioneer PC-550E
¥ 15,000 (around 1973)
Commentary
High-grade MM type cartridge with lightweight vibration system.
A 0.41 mg vibration system has been realized by adopting a lightweight titanium pipe cantilever.
The tip of the 0.15 mm square ultra-small block diamond has been polished to an elliptical shape of 0. 3x0. 7 mil to reduce tracing distortion and obtain flat characteristics over audible frequencies.
Since the vertical tracking angle is adjusted to the record cutting angle of 15 °, the distortion of the matrix 4 ch record is also reduced.
Excellent compliance is obtained by the adoption of special shape damper.
Model Rating
Type | MM Cartridge |
Structure | Inside : Super Permalloy Shield External : Injection mold |
Needle tip | 0. 3x0. 7 mil Oval Diamond Needle |
Effective mass of vibration system | 0.41mg |
Operating needle pressure range | 0.75g ~ 1.5g (1.2g appropriate) |
Frequency characteristic | 10 Hz to 30 kHz ± 3 dB |
Channel separation | 30 dB or More (1 kHz) 25 dB or More (100 Hz to 15 kHz) |
Output voltage | 2.5 mv (1 kHz, 50mm/s) |
Output balance | 0.75 dB or Less (1 kHz) |
Dynamic Compliance | 15x10-6Cm / dyne (100 kHz Horizontal / Vertical) |
Static Compliance | 20x10-6cm/dyne |
Vertical tracking angle | 15 ° |
Output impedance | 2k Ω (1 kHz) |
Load resistance | 30k Ω ~ 100k Ω |
Mounting Dimensions | JIS and EIA standards |
Exchange needle | PN-550E(¥8,200) |
External dimensions | 18 mm wide x 17.5 mm high x 31.7 mm deep |
Dead weight | 5.1g |