AIWA S-R22
¥ 26,800 (around 1979)
Commentary
FM/AM tuner of mini component my Pace5 series.
It uses a digital tuning system and displays the reception frequency accurately in numbers.
It is a method to check the actually received frequency based on the crystal oscillation with excellent frequency accuracy, and prevents the shift between the dial face and the received frequency.
The front-end high-frequency amplifier uses a dual-gate MOS-FET with excellent noise characteristics to improve sensitivity, eliminate interference, and improve selectivity.
PLL-IC is used for the MPX circuit.
Equipped with a 5-point LED bar display signal meter using red LED.
Equipped with a high-blend circuit that cuts out high-frequency noise.
It is equipped with a muting circuit that cuts out pop noise during detuning and unpleasant inter-station noise during tuning.
Equipped with an AFC circuit to prevent reception error.
A 12 VDC power supply can be used.
Model Rating
Type | FM/AM Tuner |
FM Tuner Section | |
Receiving frequency | 76 MHz to 90 MHz |
Practical sensitivity | Mono : 1.9 μ V |
Capture ratio | 1.5dB |
Effective selectivity | 70dB |
Signal-to-noise ratio | mono:75dB stereo:70dB |
Image interference ratio | 55dB |
Subcarrier suppression ratio | 65dB |
AM suppression ratio | 55dB |
Harmonic distortion factor | mono:0.1%(1kHz) stereo:0.25%(1kHz) |
Frequency characteristic | 50 Hz to 10 kHz ± 0.5 dB 30 Hz ~ 15 kHz + 0.5 -1.5 dB |
Stereo separation | 45dB(1kHz) |
Harmonics spurious | 80dB |
<AM Tuner Section> | |
Receiving frequency | 525 kHz to 1605 kHz |
Sensitivity | 20 μ V (IHF) Bar antenna : 250 μ V/m |
Distortion factor | 0.9% |
Selectivity | 30dB |
Signal-to-noise ratio | 50 dB (30% input, 1 mV) |
Image interference ratio | 45dB |
Power Supply Unit and Others | |
Pwer | 100 VAC, 50Hz/60Hz 12 VDC (Operating Range 11 ~ 14 V) |
Power consumption | 6w |
External dimensions | Width 240x Height 71x Depth 226 mm (With Handle) |
Weight | 2.1kg |
Attachment | Stereo pin code AC cord FM feeder antenna Handle |