YAMAHA YST-SW515

Commentary

515 series active subwoofer.

The unit is equipped with 25 cm cone type woofer.

QD-Bass technology is adopted.
In this system, the woofer unit is installed downward and a pyramidal diffuser plate is installed on the bottom to efficiently radiate low-temperature energy in four horizontal directions. This realizes smooth frequency characteristics and free setting regardless of installation location.

The enclosure uses the A-YST II (Advanced Yamaha Active Serve Technology) system, which is a review of the A-YST system and further improves sound quality.
Based on the concept of an air woofer that uses air itself as a diaphragm, the A-YST system enables low-sound reproduction even in a small enclosure, which is equivalent to that of a large speaker. In addition, the A-YST II system drives the frequency band above the "fo" (lowest resonance frequency) of the woofer unit with a constant current, and uses a uniquely shaped port that suppresses wind noise to further improve the speed and clearness of heavy low-sound.

The exterior has a cherry finish.
It has a real wood veneer finish with the same polyurethane open pore coating as high-grade wood pianos.

Equipped with a new auto standby function, the periodic power consumption is further reduced.

Equipped with a B. A. S. S. mode switch.
Movie/Music can be switched, and low sound playback is possible depending on the source.

Model Rating

Method	Built-in Amplifier / 1-Way / 1-Speaker / A-YSTII System / Floor Type / Anti-magnetic Design
Units Used	For low band : 25 cm cone type
Playback frequency band	20 Hz to 160 Hz -10dB
Rated output	250W
High-cut filter	40 Hz ~ 140 Hz Continuously Variable
Power consumption	100W
External dimensions	Width 350x Height 430x Depth 382 mm
Weight	19.0kg
Attachment	2 x 4m speaker cables RCA pin-plug cable (5m) Vibration-proof pad