Audio Database
DSP-R395
Commentary

DSP AV amplifier equipped with 5.1 ch external input terminal.

Equipped with 5.1 ch external input terminal.
You can enjoy 5.1 channel surround sound by combining with dts and DVD player with Dolby digital decoder.

Equipped with YSS 203 b as a key device for sound field processing.
The YSS-dolby B has built-in functions required for Yamaha's original cinema DSP processing, and realizes a Dolby Pro-logic decoder and DSP sound field processing in one chip. 203 b has built-in functions required for cinema DSP processing.
There are eight surround programs, including Dolby Prologic and Dolby Prologic Enhanced.

The power amplifier section uses a discrete configuration amplifier of the same design for 5 channels.
The power supply section is equipped with a heavy-duty power transformer and a large-capacity audio capacitor.

The analog / digital separation design is thoroughly implemented to reduce mutual interference.

Built-in FM/AM tuner.
It is equipped with preset functions for 40 stations, auto-preset functions for FM stations, and edit functions for preset stations.

The main speaker terminal uses a large speaker terminal compatible with a banana plug.

By combining with the separately sold DDP-2, even a DVD player without a Dolby Digital Decoder can enjoy 3 sound field cinema DSP which is Dolby Digital 5.1 ch with cinema DSP processing.

It is equipped with a preset remote controller that stores operation codes for AV equipment of major manufacturers including Yamaha products.

Model Rating
Type DSP AV Amplifier
<Audio section>
Rated Output (20 Hz ~ 20 kHz, THD 0.04%) Main : 60W + 60W (6 Ω)
Center : 60W (6 Ω)
Rear : 60W + 60W (6 Ω)
Maximum Practical Output (1 kHz, 10% THD) Main : 95W + 95W (6 Ω)
Center : 95W (6 Ω)
Rear : 95W + 95W (6 ohm)
Dynamic power (main L/R, IHF dynamic headroom measurement) 70W + 70W (8 Ω)
85W + 85W (6 Ω)
105W + 105W (4 Ω)
130W + 130W (2 Ω)
Power bandwidth 10 Hz ~ 50 kHz (Main L/R, THD 0.1%, 30W, 8 Ω)
Damping factor 60 (Main L/R, Speaker A, 20 Hz to 20 kHz, 8 Ω)
Input Sensitivity / Impedance Phono MM : 2.5mV/47k Ω
CD, etc. : 150mV/47k Ω
External Decoder Input
Main L/R : 150mV/47k Ω
Center, Surround L/R, Subwoofer : 150mV/40k Ω
Maximum Allowable Input (1 kHz) Phono MM:100mV(THD 1%)
CD and others : 2.2 v (Effect on, THD 0.5%)
Output Level / Impedance Rec out : 150mV/2.7k Ω
Subwoofer : 5.0V/1.2k Ω
Headphone Output / Impedance CD, etc. : 0.43V/330 Ω (Input 1 kHz, 8 Ω)
Frequency characteristic CD, etc. : 20 Hz ~ 20 kHz ± 0.5 dB
RIAA deviation Phono MM : + / - 0.5 dB
Total harmonic distortion factor Phono MM : 0.02% (Rec out, 20 Hz to 20 kHz, 1 v)
CD, etc. : 0.025% (Main, SP out, Effect off, 20 Hz to 20 kHz, 30W, 8 Ω)
S/N ratio (input short) Phono MM : 80 dB (2.5 mV, Rec out)
CD and others : 96 dB (Effect off, 150 mV, SP out)
Residual noise (Main L/R, SP out) 150 μ V
Channel separation (Effect off, Vol-30dB) Phono MM : 60dB/55dB (input short, 1kHz/10kHz)
CD, etc. : 60dB/45dB (input 5.1k Ω short, 1kHz/10kHz)
Tone control Bass : ± 10 dB (50 Hz)
Turnover frequency : 350 Hz
Treble : ± 10 dB (20 kHz)
Turnover frequency : 3.5 kHz
Filter characteristic Subwoofer (LPF) : fc = 150 Hz, 6dB/oct
<Video Part>
Video level 1.0Vp-p/75 Ω
Maximum allowable input 1.5Vp-p/75 Ω
S/N 50dB
Monitor out frequency band 5 hz to 10 mhz -3dB
<DSP Unit>
Dolby Pro Logic Decoder Yamaha YSS203-B
RAM 256kbit PS-RAM
Center mode Normal / Wide / Phantom
Test tone L-C-R-S
Program Hifi DSP : 5 types
Cinema DSPs : 1 type
Dolby Prologic : 1 type
<Input / Output Unit>
Input terminal Audio signal : Route 6 (CDs, Phono, Tape/MD, DVDs / LD, VCR, TV/DBS)
External decoder 6-ch audio signal : 1 system
Video signal : Route 3 (DVD/LD, TV/DBS, VCR)
Output terminal Rec out
Audio signal : 2 systems (Tape/MD, VCR)
Video signal : 1 system (VCR)
Output
Audio signal : 1 system (subwoofer)
Video monitor : 1 system
Speaker output terminal Main L/R (A/B)
Center
Rear L/R
FM Tuner Section
Receiving sensitivity 76.0 mhz to 90.0 mhz
50 dB S/N sensitivity (1 kHz, 100% modulation) Mono : 1.6 μ V (15.3 dBf)
Stereo : 23 μ V (38.5 dBf)
Effective selectivity (± 400 kHz) 75dB
Signal-to-noise ratio mono:81dB
stereo:75dB
Distortion Factor (1 kHz) mono:0.1%
stereo:0.2%
Stereo separation 48dB(1kHz)
Frequency characteristic 20 Hz to 15 kHz ± 1 dB
Antenna input 75 Ω, unbalanced
<AM Tuner Section>
Receiving frequency 531 to 1611 kHz
Practical sensitivity 300 μ V/m
Signal-to-noise ratio 52dB
Antenna Loop antenna
<Tuner audio section>
Output Level / Impedance FM : 550 mV (100% modulation, 1 kHz)
AM : 150 mv (30% modulation, 1 khz)
<General>
AC outlet Switched : 2 systems, Total 100 Wmax
Power supply voltage 100 VAC, 50Hz/60Hz
Power consumption 195W
External dimensions Width 435x Height 151x Depth 391 mm
Weight 10.5kg
Attachment Remote control
FM simple antenna
AM loop antenna
Surround Mode Cinema DSP program
Pro Logic
Pro Logic Enhanced
HiFi DSP program
Concert Video
Mono Movie
TV Sports
Disco
Rock Concert
Concert Hall