TRIODE TR-EQ1
¥ 250,000 (released in 2001)
Commentary
Phono equalizer amplifier using equalizer module of DACT Co.
The amplifier section is equipped with CT-100, an amplifier module for ultra-precision RIAA equalization made by DACT of Denmark.
This module has a highly reliable DIP switch and three selectable constants of voltage gain, input resistance and input capacitance. It is compatible with most commercially available MC/MM cartridges. The circuit uses the best semiconductor available at the time and a low-noise, non-inductive SMD metal film resistor (made in Germany).
The power supply has a dual monaural configuration, and the ± low-voltage circuit provided for each channel realizes a complete dual monaural configuration.
The output jacks are both balanced and unbalanced.
The time constants of 3.18 μ sec (50 Hz) and 7950 μ sec (20 Hz) can be individually selected and added by changing the characteristics of both high and low ranges of the normal RIAA characteristics with a DIP switch.
Designed to remove part of the top plate for DIP switch adjustment.
Model Rating
Type | Phono equalizer |
Frequency characteristic | 5 Hz to 100 kHz ± 0.1 dB |
Total harmonic distortion factor | 0.0003% or Less (1 kHz) |
Signal-to-noise ratio | 98 dB or more |
RIAA deviation | ± 0.05 dB or less |
Channel separation | 120dB |
Input impedance | 10 Ω ~ 47k Ω, 21-step variable type |
Input sensitivity | 0.1 mV ~ 10 mV, step variable type |
Input terminal | Unbalanced : 1 system |
Output terminal | Balanced output : 1 system Unbalanced output : 1 system |
Output impedance | 0.1 Ω |
Allowable output | Balanced output : + / - 28 v (p-p) Unbalanced output : + / - 14 v (p-p, 10 vrms) |
Power consumption | 15W |
External dimensions | Width 440x Height 100x Depth 335 mm |
Weight | Approx. 7.0 kg |