OTTO/SANYO TP-Q50
¥ 69,800 (released in 1980)
Commentary
A full-auto player with a direct drive system.
The drive system is a direct drive system, and the drive motor is a 20 pole, 30 slot, supersaturated magnetic core type brushless motor.
In addition, a quartz-locked PLL servo system is adopted for the servo mechanism, and combined with a 1.9 kg turntable, high rotational accuracy is obtained.
A lightweight straight arm is used for the tone arm to suppress unwanted vibrations in the ultra-low range caused by warping or eccentricity of the record by moving fo and to improve traceability.
In addition, the arm has an anti-skating control function.
The full-auto mechanism uses a 2-motor system that uses a DC motor exclusively for driving the tone arm, and ensures smooth operation for each operation.
The head shell uses a carbon fiber head shell that suppresses resonance.
In addition, the MG-55, a MM type cartridge, is installed in the cartridge.
Electronic control feather touch type is adopted for the switches, and rotation speed, disc size, repeat, etc. can be switched.
The cabinet is made of BMC material, a high-density material with a large howling margin, reducing the influence of external vibration.
Model Rating
Type | Record player |
<Turntable portion> | |
Drive system | Direct drive system |
Drive motor | Quartz PLL Servo 20 Pole 30 Slot DC Motor |
Turntable | 31.2 cm aluminum alloy die-cast, 1.9 kg |
Moment of inertia | 330 kg / cm2(Including Rubber Sheet) |
Number of revolutions | 33 1/3, 45 rpm |
Wow flutter | Not more than 0.02% (WRMS) |
Signal-to-noise ratio | 73dB(DIN-B) |
Rotational speed adjustment | Within ± 2% |
Tone Arm Section | |
Type | Static balance straight arm |
Effective arm length | 237mm |
Overhang | 15mm |
Tracking error | ± 1.5 ° |
Needle pressure variable range | 0 ~ 3.0g (0.1g step) |
Applicable Cartridge Weight | 4g ~ 10g (when using the attached shell) |
Attached shell | Integrally molded carbon fiber |
Queuing | Plunger type viscous dump |
Cartridge Section | |
Type | MM Type (MG-55) |
Needle to be used | 0.6 mil Diamond Needle (ST-55D) |
Output | 2.5mV |
Frequency characteristic | 20 Hz to 20 kHz |
Crosstalk | 20 dB or More (1 kHz) |
Proper needle pressure | 2.0g |
Optimum load | 47k Ω, 100 pf |
<General> | |
Attachment mechanism | Height variable absorber Arm elevation Anti-skating |
Pwer | 100 VAC, 50Hz/60Hz |
Power consumption | 10W |
External dimensions | Width 440x Height 160x Depth 379 mm |
Weight | 8.9kg |