SANSUI QS-10
¥ 29,500 (around 1973?)
Commentary
A 4-channel rear amplifier consisting of a Sansui QS synthesizer / decoder section and a rear main amplifier section.
You can enjoy 4-channel playback by connecting it to a tape monitor switch of your own amplifier such as a separate type, modular type or receiver.
Equipped with a function switch that allows you to you to choose the effect that matches the difference in the music number and composition of the source and the difference in the recording method.
The rear speaker can be arranged in two ways (2-2 system, front 2-2 system) depending on the number of songs and composition by using the switch.
By switching the switch, you can enjoy the 4-channel effect by comparing 2 methods.
A slide type is used for front and back volume adjustment.
Equipped with a stereo main amplifier using silicon transistors.
The synthesizer and decoder uses a pure electronic circuit system that employs an IC originally developed by SANSUI.
Model Rating
Type | 4-channel rear amplifier |
<Synthesizer / decoder unit> | |
Demodulation system | Sansui QS Matrix |
Rated input | 230mV/50k Ω |
Tape monitor | 2 ch : 230mV/50k Ω 4 ch (Aux) : 140mV/50k Ω |
Recorded output | 2ch:230mV(0dB) |
Rated output (front) | 2ch:160mV 4ch:230mV |
Phase shift | Left : -90 degrees (300 Hz) Right : + 90 ° (600 Hz) |
Main Amplifier Section | |
Music Power (IHF) | 20W (8 Ω) |
Effective power | 6W/6W (8 Ω) |
Distortion factor | 1.5% |
Frequency characteristic | 20 Hz to 40 kHz -3dB |
Load impedance | 4 Ω ~ 16 Ω |
<General> | |
Power supply voltage | 100 VAC, 50Hz/60Hz |
Power consumption | 35W (max) |
External dimensions | Width 282x Height 105x Depth 202 mm |
Weight | 3.9kg |