JBL 5234A
¥ 140,000 (around 1983)
Commentary
A dual-channel electric crossover network developed for studio monitors and sound reinforcement.
The 5234A allows two way (stereo) or three way (mono) multi-amplifiers.
Equipped with a continuously variable high-level control.
The crossover frequency is determined by inserting a filter board (sold separately). There are 8 types of 12dB/oct filter boards and 3 types of 18dB/oct filter boards. For other frequencies, a blank board corresponding to the cutoff characteristics is used.
For blank circuit boards, any frequency can be set by installing capacitors or resistors. The recommended parts to be used are a Mylar capacitor with less than 5% error and a resistor with 1/4 watts and less than 5% error.
Model Rating
Type | Channel divider | ||
Gain | 0 dB (Passport) | ||
Crossover frequency | Plug-in Module Type (Sold Separately) Crossover point -3dB + / - 10% |
||
Damping property | 12dB/oct, 18dB/oct (determined by plug-in module) | ||
Total harmonic distortion factor | 0.5% (20 Hz to 20 kHz, at rated output, listed in catalog) 0.01% (+ 18 dBv,> 100k Ω load, as stated in technical manual) |
||
Frequency characteristic | 20 Hz to 20 kHz ± 0.5 dB | ||
Signal-to-noise ratio | 90 dB or More (20 Hz to 20 kHz, Band Pass Filter Used) | ||
Channel separation | 70 dB or More (20 Hz to 20 kHz) | ||
Rated output | 6.2 V (+ 18 dBv, 0 dBv = 0.775 Vrms (1 mW, 600 Ω load) | ||
Input impedance | 50k Ω balance | ||
Load impedance | 600 Ω or more | ||
Output impedance | 47 Ω (Catalog Description) 50 Ω (unbalanced, described in technical manual) |
||
Input | Screw type terminal 6.3 mm horn jack, 3-circuit balanced input |
||
Output | Screw type terminal 6.3 mm Horn Jack, 2 Circuit Unbalanced Output |
||
Pwer | 100 ~ 120 VAC / 200 ~ 240 V, 50Hz/60Hz | ||
Power consumption | 6W | ||
External dimensions | Width 483x Height 44x Depth 194 (209) mm (1 EIA standard rack size) | ||
Weight | 1.8kg | ||
Sold Separately |
|
Crossover filter substrate
Model number | Crossover frequency | ||
52-5121 | 250 Hz, 12dB/oct. | ||
52-5122 | 500 Hz, 12dB/oct. | ||
52-5123 | 800 Hz, 12dB/oct. | ||
52-5124 | 1.2 kHz, 12dB/oct. | ||
52-5125 | 5 kHz, 12dB/oct. | ||
52-5127 | 7 kHz, 12dB/oct. | ||
52-5130 | 1 kHz, 12dB/oct. | ||
52-5140 | Studio Monitor 4343 only, 300 Hz, 12dB/oct. | ||
52-5120 | Blank filter substrate, 12dB/oct. | ||
Frequency | Condenser | Resistance | |
50Hz 70Hz 100Hz 200Hz 300Hz 400Hz 600Hz 700Hz 900Hz 1kHz 1.1kHz 1.5kHz 2kHz 2.5kHz |
0.22 μ F 0.22 μ F 0.22 μ F 0.12 μ F 0.082 μ F 0.055 μ F 0.039 μ F 0.032 μ F 0.027 μ F 0.022 μ F 0.022 μ F 0.012 μ F 0.012 μ F 0.0082 μ F |
10k Ω 7.5k Ω 4.7k Ω 4.7k Ω 4.7k Ω 5.1k Ω 4.7k Ω 5.1k Ω 4.7k Ω 5.1k Ω 4.7k Ω 6.2k Ω 4.7k Ω 5.6k Ω |
|
51-5130 | Blank filter substrate, 18dB/oct | ||
51-5132 | 500 Hz, 18dB/oct. | ||
51-5133 | 800 Hz, 18dB/oct. | ||
51-5138 | 80 Hz, 18dB/oct. | ||
51-5145 | 290 Hz, 18dB/oct. |